Pptp – D-Link WIRELES 108 ROUTER DI-724GU User Manual
Page 34
34
D-Link DI-724GU User Manual
Section 3 - Configuration
PPTP
PPTP (Point to Point Tunneling Protocol) uses
a virtual private network to connect to your ISP.
This method of connection is primarily used in
Europe. This method of connection requires you
to enter a Username and Password (provided
by your Internet Service Provider) to gain
access to the Internet. The ISP provides the
values for
PPTP IP Address, PPTP Subnet
Mask , PPTP Gateway IP Address, and PPTP
Server IP Address (may be the same as the
gateway).
If your ISP has assigned a fixed IP address,
select Static IP and enter the fixed IP address
in the following field. For PPTP and L2TP,
the subnet mask and the default gateway IP
address must also be entered. If the ISP’s
servers assign these values upon establishing
a connection, select Dynamic IP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
This value is provided by agreement between
you and the ISP.
PPTP:
Dynamic IP/Static IP:
IP Address:
Subnet Mask:
Default Gateway:
Server IP Address:
Username: