Cabasse STREAM 1 User Manual

Page 22

e n g l i s h

LED DISPLAY MODES

Press

2 then

8 to switch between full time and flash

display modes.
When the flash mode is on, every control from the Cabasse
Stream Audio Control application, the Stream remote control
or the keypad of Stream 1, activates a flash of the LED 9 . The
color of the flash confirms the nature of the active input. The
LED 9 remains off until next control confirmation.
When the full time mode is on, a brief fade out of the LED 9
or a modification of its color confirms the control.

USE OF STREAM 1 WITH CONTROL KEYS
AND THE STREAM REMOTE CONTROL

ECO / ON mode selection

2 3 4

VOL "+" and "-", Mute keys

and 6 wifi: reverse and forward scanning

Bluetooth: previous and next title of the played album or
playlist.

Music: play or pause (wifi and Bluetooth)

Source selection: press this key to select one of the connec-

ted sources: Bluetooth (blue LED 9 ), wifi (orange LED 9 )
or analogue (green LED 9 ).

UNPACKING

Open carton flaps; remove all the components. If the spea-
kers or the subwoofer appear damaged, do not use them.
Repack everything in the original packing and contact your
authorised Cabasse dealer immediately. We suggest you to
retain the packing for future use.

SETTING UP
THE COMPONENTS OF YOUR SYSTEM

1 Stream 1, 1 external power supply, 1 remote control, 1

manual and one warranty card.

INSTALLATION

Place Stream 1 lying, standing or hanging within reach of a

mains plug.

Leave enough free room above and around Stream 1 in

order to:
- allow good wifi and Bluetooth transmission,
- give access to a smartphone for easy NFC tap Bluetooth
connection.
- provide a good audio restitution.

POWER CONNECTION

Connect the power supply to the Stream 1, plug it into the

mains and position the POWER ON/OFF switch to "ON".
Stream 1 is ready to play when the LED 9 turns on.

NOTE: the wifi mode of Stream 1 is available when the
PWR (Power) LED has turned from red to green, around 40
seconds after switching on the Stream 1.

ON / ECO

a) Switching to ECO mode: press the 1 key of the Stream

remote control or of the Stream 1 keypad. The wifi and
Bluetooth functions remain available. The audio section of
Stream 1 is no longer powered.
b) Getting back to ON mode:

- press the 1 key of the Stream remote control or of the

Stream 1 keypad or

- launch a Bluetooth connection (NFC or other) or
- press "Play" on the Cabasse Stream Audio Control appli-

cation.