BUG-O Systems UNI-BUG III User Manual

Page 2

SAFETY

PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH.

KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION,

MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY

BY QUALIFIED INDIVIDUALS.

EQUIPMENT DAMAGE

POSSIBLE.

ELECTRIC SHOCK can kill.

1) The equipment is not waterproof. Us-

ing the unit in a wet environment may

result in serious injury. Do not touch

equipment when wet or standing in

a wet location.

2) The unused connectors have power

on them. Always keep the unused

connectors covered with the supplied

protective panels. Operation of the

machine without the protective pan-

els may result in injury.

3) Never open the equipment without

first unplugging the power cord or

serious injury may result.

4) Verify the customer-supplied power

connections are made in accor-

dance with all applicable local and

national electrical safety codes. If

none exist, use International Electric

Code(IEC) 950.

5) Never remove or bypass the equi-

ment power cord ground. Verify the

equipment is grounded in accor-

dance with all applicable local and

national electrical safety codes. If

none exist, use International Electric

Code (IEC) 950.

READ INSTRUCTIONS.

Read the instruction manual before

installing and using the equipment.

1) Do not plug in the power cord without

first verifying the equipment is OFF

and the cord input voltage is the same

as required by the machine or serious

damage may result.

2) Always verity both the pinion and

wheels are fully engaged before ap-

plying power or equipment damage

may occur.

3) Do not leave the equipment unat-

tended.

4) Remove from the work site and store

in a safe location when not in use.

1) Never try to stop the pinion from mov-

ing except by removing power or by

using the STOP control.

2) Do not remove any protective panels,

covers or guards and operate equip-

ment.

MOVING PARTS can

cause serious injury.

FALLING EQUIPMENT

can cause serious

personal injury and

equipment damage.

Faulty or careless user installation is

possible. As a result, never stand or

walk underneath equipment.