BUG-O Systems UNI-BUG III - Manual (Page 16)

16
2
1
3
UNI-BUG III DUAL GUN WELDING KIT
ITEM QTY PART NO. DESCRIPTION
1 1 UNI-2400 UNI-BUG III 120 VAC
1 1 UNI-2402 UNI-BUG III 240 VAC
1 1 UNI-2404 UNI-BUG III 42 VAC
2 1 UNI-1350 UNI-BUG Dual Welding Group
3 1 UNI-1355 Dual Cable Anchor
UNI-2600, 2602, 2604
The UNI-2600 UNI-BUG III Dual Gun Welding Kit is equipped
for the mounting of two welding guns and provides components
to independently adjust either gun in the vertical and horizontal
plane. The unit features programmable control for stitch or
continuous welding and is designed to mount and run on the top
edge of a flat bar or stiffener with a minimum height of 2" (51 mm)
and a maximum width of 2" (51 mm). The machine will turn on a
radius down to 6" (152 mm). The unit will travel at speeds from 4
to 75 inches per minute (102-1905 mm/min) and has a horizontal
load capacity of 50 lbs. (22.7 kg).