BUG-O Systems UNI-BUG III - Manual (Page 18)

18
UNI-BUG III “T” DUAL GUN WELDING KIT
ITEM QTY PART NO. DESCRIPTION
1 1 UNI-2840 UNI-BUG III 2''-4'' “T” 120 VAC
1 1 UNI-2842 UNI-BUG III 2''-4'' “T” 220 VAC
1 1 UNI-2844 UNI-BUG III 2''-4'' “T” 42 VAC
2 1 UNI-1350 UNI-BUG Dual Welding Group
3 1 UNI-1355 Dual Cable Anchor
3
1
2
UNI-2800-4, 2802-4, 2804-4
The UNI-2800-4 UNI-BUG III Dual Gun “T” Profile Welding Kit
is equipped for the mounting of two welding guns and provides
components to independently adjust either gun in the vertical
and horizontal plane. The unit features programmable control
for stitch or continuous welding and is designed for straight line
welding of “T” Profiles. This unit will mount and run on top of “T”
Profiles with a minimum height of 2" (51 mm) and widths from
2"-4" (51-102 mm). The unit will travel at speeds from 4 to 75
inches per minute (102-1905 mm/min) and has a horizontal load
capacity of 50 lbs. (22.7 kg).