BUG-O Systems UNI-BUG III - Manual (Page 15)

15
UNI-BUG III SINGLE GUN WELDING KIT
ITEM QTY PART NO. DESCRIPTION
1 1 UNI-2400 UNI-BUG III 120 VAC
1 1 UNI-2402 UNI-BUG III 240 VAC
1 1 UNI-2404 UNI-BUG III 42 VAC
2 1 BUG-1855 UNI-BUG Welding Group
2
1
Included
with
Item #2
UNI-2500, 2502, 2504
The UNI-2500 UNI-BUG III Single Gun Kit is equipped for the
mounting of a single gun and provides components to manually
adjust the gun in the vertical and horizontal plane. The UNI-BUG
III provides programmable control for stitch or continuous welding
and is designed to mount and run on the top edge of a flat bar or
stiffener with a minimum height of 2" (51 mm) and a maximum
width of 2" (51 mm). The machine will turn on a radius down to 6"
(160 mm). The unit will travel at speeds from 4 to 75 inches per
minute (102 - 1905 mm/min) and has a horizontal load capacity
of 50 lbs. (22.7 kg).