BUG-O Systems SE-2PTD - Manual (Page 5)

5
INTRODUCTION
The SE-2PTD Programmable Pass Through machine provides dual programming capabilities
enabling the user to make saddle cuts, offset cuts, laterals, miters, holes, and shapes in pipes.
The Programmable Pass Through machine is capable of passing pipes from 1" to 4" (25-100mm)
through the spindle. Pipes from 4" to 14" (100-355mm) can be externally chucked by clamping the
I.D. of the pipe. The Programmable Pass Through machine is available for plasma and oxy-fuel
cutting and eliminates the need to make templates or layout complex cuts.
TECHNICAL DATA
Power Requirement: 120 VAC/50-60/1
240 VAC/50-60/1
Speed Range: 3.75 rpm
Cutting Diameter: Pass Through: 1" to 4" (25 mm to 100 mm) O.D.
Externally Chucked: 4" to 14" (25 mm to 355 mm) diameter.
Pipe Weight Capacity: 375 lbs. (170 kg) pass through when supported.
Maximum Overhung Length: 15" (383 mm)
Maximum Overhung Weight: 150 lbs. (68 kg)
Net Weight: 345 lbs. (157 kg)
Shipping Weight: 550 lbs. (249.5 kg)
DIMENSIONS
35"
(889mm)
10"
(267mm)
40"
(1016mm)
19"
(483mm)