beautypg.com

Printing via a bluetooth connection, Supported devices, Next – Canon SELPHY CP740 User Manual

Page 32

background image

32

Getting Ready

Printing

Appendices

Overview

Troubleshooting

Tasks and Index

Next

Back

Return to Cover Page

3

Aim the mobile telephone’s infrared port at the printer’s
infrared data receiver and initiate data transfer from the
telephone.

See the user guide for your mobile telephone for instructions for
configuring the infrared data settings and for printing.

While data is being transmitted, a screen similar to the following will
appear in the printer’s LCD monitor and the indicator will blink
green. If the transfer is not working well, reposition the mobile
telephone closer and directly in front of the infrared data receiver
and reinitiate the transfer.

The printer will begin printing after the transmission is complete.

This section explains how to print images from a Bluetooth enabled
mobile telephone.

Supported Devices

Check whether or not your mobile telephone has the required functions
for Bluetooth enabled printing.

Requirement 1: Built-in Bluetooth capabilities that support OPP (Object

Push Profile) or BIP (Basic Imaging Profile). See the user
guide for your mobile telephone for information on
the profiles supported.

Requirement 2: Built-in camera capable of recording and saving image

data (JPEG images of 2.5 MB or less).

• Mail and address book information cannot be printed.
• Mobile telephone security settings prevent printing of images

downloaded from the Internet and images downloaded from a URL sent
by email.

• Movies cannot be printed.
• The printer may not be able to print images saved onto the memory card

of some types of mobile telephones.

• The position and orientation (horizontal or vertical) of images for printing

is set automatically by the printer. Since images are enlarged or reduced
to fit the paper size, the edges of the image may be cropped with certain
combinations of image and paper sizes.

• Data transmission times are long when the data sizes are large.

Accordingly, it may take some time before printing starts.

Up to approximately
20 cm (7.9 in.)

Hold the mobile telephone within 10
degrees of the sensor in any direction

The distance over which infrared signals can be
transmitted and received varies according to the mobile
telephone model and operating system.

Printing via a Bluetooth Connection

This manual is related to the following products: