Dell 1610HD - Manual (Page 64)

64 Troubleshooting Your Projector
TEMP light is blinking amber A projector fan has failed and the projector
will automatically shut down. Try to clear the
projector mode by pressing and holding the
POWER button for 10 seconds. Please wait
for about 5 minutes and try to power up again.
If the problem persists, contact Dell™.
The OSD does not appear on
the screen
Try to press the Menu button on the panel for
15 seconds to unlock the OSD. Check the
Menu Lock on page 42.
The remote control is not
operating smoothly or works
only within a limited range
The battery may be low. If so, replace with 2
new AAA batteries.
Problem (continued) Possible Solution (continued)