Dell 1610HD - Manual (Page 39)

Using Your Projector 39
L ANGUAGE —Allows you to set the language for the OSD. Press on the control
panel or press Enter button on the remote control to activate the Language menu.
P ROJECTOR M ODE —Allows you to select the projector mode, depending upon how
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
• Rear Projection-Ceiling Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a ceiling-
mounted projection.
A UTO K EYSTONE —Select On to enable the auto correction for vertical image
distortion caused by tilting the projector.
V. K
EYSTONE —Manually adjust the vertical image distortion caused by tilting the
projector.
S
TANDBY VGA O UTPUT —Select On or Off the VGA output function at projector
standby status. Default is Off.