Broadata Communications 6100E Series - Manual (Page 7)

BCI 6100E User’s Manual
Digital Fiber Optic Multi-Channel Audio Transport System with Data Options
Broadata Technical Support, (800) 214-0222 8
2.0 SETUP
The BCI 6100E Series units are used in pairs. One 6100E-T transmitter
unit is located at the near end and connected to an identical 6100E-R
receiver (6108E or 6116E, respectively) located at the far end of the link
through two optical fibers. Each unit provides a separate electrical
interface connector for the audio data signals. Connections are one to
one between both units. Figure 2-1 depicts a typical installation.
Figure 2-1
6100E Series Setup
2.1 Mounting
Before installing the units into your housing, make sure there is
enough space to pull and connect both the electrical and optical
cables without stressing them beyond the manufacturer’s
limitations (also known as the bend radius minimum). Rack
Mount kits are available through special order.