Broadata Communications 6100E Series - Manual (Page 16)

BCI 6100E User’s Manual
Digital Fiber Optic Multi-Channel Audio Transport System with Data Options
Broadata Technical Support, [email protected] 17
b. Fiber and fiber connectors are not broken. Ensure that
the optical loss does not exceed the specified optical
power attenuation (see Section 5.0 Specifications for
the optical power budget).
c. For each unit, the transmit (TX) fiber is connected to
the other unit’s receiver (RX).
3. If the POWER indicator and Optical Link indicator are
ON, but the audio/video channels are not operating,
then:
a. Check to see that the attached user equipment is turned
on.
b. Both ends of the link are connected to the corresponding
equipment and to the same corresponding channel port.
c. Cable connections at both the video/audio channels
are securely fastened to each connector. Turn the power
off, then back on to reset the link.
d. Output levels of the user’s video and audio sources are
not above the allowed input levels of the 6100E units
(see Section 5.0 Specifications).