Broadata Communications 6100E Series - Manual (Page 13)

BCI 6100E User’s Manual
Digital Fiber Optic Multi-Channel Audio Transport System with Data Options
Broadata Technical Support, (800) 214-0222 14
2.3 AC Power Connection
Congratulations! You are now ready to power up the BCI 6100E and set
up your network connection. In order to make sure that you have a
proper installation, please observe the following:
1. Your AC jack has power.
2. Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
3. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
6100E from sensitive voltage conditions.
The 6100E derives power from an external 12VDC/1.6A power supply
(6104E and 6108E) or from an internal 95-240 VAC/1.6A power supply
(6116E). This power supply comes standard for the 6100E unless
otherwise specified.
To provide power to the 6100E, simply connect the power cord, already
provided with the units, and connect it to the wall jack. (You will find one
power cord per unit). Once the power cord has been connected to the
wall jack, connect the other end to the unit. Once the power cord has
been connected, turn the switch ON (I) on the provided back panel.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.