Broadata Communications 6100E Series - Manual (Page 15)

BCI 6100E User’s Manual
Digital Fiber Optic Multi-Channel Audio Transport System with Data Options
Broadata Technical Support, (800) 214-0222 16
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
There is no operator maintenance other then keeping the units
clean. However, observe the light indicators (shown in Table 4)
to make sure that the unit is working properly.
4.2 Troubleshooting
If the BCI 6100E units do not operate properly after installation,
check for possible cable breaks, loose connections, and
incorrect cable connections. If a problem exists on the fiber
link, please check your fiber connectors for improperly cleaned
fiber cables and connectors. If problems persist that may be
fiber related, contact BCI at 1-800-214-0222 for further
assistance.
For electrical problems, perform the following troubleshooting
procedures:
1. If the POWER indicator is OFF, check for the following:
a. The line cord is plugged into the unit and your outlet
has power.
b. The 6100E unit is switched on.
c. Check for blown fuses (located in the rear panel-entry
module).
2. If the POWER indicator is ON, but the Optical Link
indicator is OFF, check for the following:
a. Make sure the appropriate (singlemode or multimode)
fibers are being used.