Broadata Communications LBC-H/V-T-WP - Manual (Page 13)

LBC-H/V-T-WP User’s Manual
Link Bridge
TM HDMI/VGA Wall Plate Transmitter System
Broadata Technical Support, (800) 214-0222 14
4.0 DC POWER CONNECTION
Congratulations! You are now ready to power up the LBC-H/V-T-WP
and set up your network connection. In order to make sure that you
have a proper installation, please observe the following:
1. Your AC jack has power.
2. The 5VDC power supply is working.
3. Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
4. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
LBH-DVI from sensitive voltage conditions.
The LBC-H/V-T-WP derives power from an external 54VDC power supply
or via PoH (Power over HDBaseT). This power supply is a wall mounted
AC/DC adapter, 100-240 VAC, 50-60 Hz, at 1.0A. This power supply
comes standard for the LBC-H/V-T-WP unless otherwise specified. To
provide power to the LBC-H/V-T-WP, simply connect the power cord,
already provided with the units, and connect it to the wall jack. (You will
find one power cord per unit). Once the power cord has been connected
to the wall jack, connect 24VDC to the unit and the unit should power up
immediately. If you have any problems or concerns, regarding the
installation, make sure that you have taken the proper steps to ensure
a proper power connection. Otherwise, feel free to contact us for any
questions you may have.