Broadata Communications LBC-H/V-T-WP - Manual (Page 10)

LBC-H/V-T-WP User’s Manual
Link Bridge TM HDMI/VGA Wall Plate Transmitter System
Broadata Technical Support, [email protected] 11
3.5 Audio Interface
The audio interface supports one stereo channel high fidelity
analog, line-level audio signal connected to the LBC-H/V-T-WP
unit. The following steps illustrate the installation procedures
for audio devices.
To send audio signals, label and connect one stereo audio-jack
cable to the “AUDIO” connector of the line level audio source.
On the LBC-H/V-T-WP unit, connect the other end of the cables
to the front panel stereo jack connector labeled “AUDIO IN”
(see Figure 3.4).
Figure 3-4
User’s Analog/Digital Audio Source