Broadata Communications LBO-DVI-AD - Manual (Page 10)

LBO-DVI-AD User’s Manual
Link Bridge TM Fiber Optic DVI Video Converting Transmitter System
Broadata Technical Support, [email protected] 11
2.2.1.3 Serial Data Interface
Each LBO-DVI-AD unit can be used for RS-232 interface.
RS-232 data
The LBO-DVI-AD transmits two channels of data signals. Follow
the procedures for installing data terminal devices.
1. Label and connect one serial computer data cable to the
user’s RS-232 device.
2. Connect the other end of this cable to the front panel data
terminal block connector on the LBO-DVI-AD (see
Figure 2-4).
Figure 2-4
RS-232 Terminal block pinout
Ch 2 Ch 2 Ch 1 Ch 1 GND
OUT IN