Boyertown Solaia CSL6230 - CSL12590 Cast Iron Boiler - Manual (Page 14)

14
Figure 5
Temperature Sensor Installation
1. Install (2) SB875-11 black anti short bushings into the upper holes in the mounting brackets along
the right hand side of the boiler.
2. Install (1) SB875-11 black anti short bushing into the 7/8” hole in the right front jacket panel.
3. Run the sensor through the mounting brackets and the jacket side panel.
Install Top Panels
Place rear top panel over the side and rear panels. Place the front top panel over the sides. Fasten the top
panels using #10 x 3/4” hex washer sheet metal screws starting from the front and rear side and working into
the middle. See Figure 6 and Figure 7 for top panel drawings.
Figure 6