Bladez Fitness R400 Recumbent Bike - Manual (Page 17)

17
STEP 6
1) Pre-assemble the 2×M8 Allen Bolt (7) on the handlebar post clockwise. You must tighten the screws
down to fit the Handle Bar Post (9) into the Main Frame (36).
2) Connect the Upper hand pulse cable (11) with Middle hand pulse cable (27).
3) Connect the Upper computer cable (12) with Lower computer cable (28).
4) Insert the Handlebar post (9) into the Main Frame (36), loosen the 2×M8 Allen Bolt (7) in a counter
clockwise direction, this will secure the post. Attach the plastic cover (92) onto the Main Frame (36).