Beurer BY 99 - Manual (Page 27)

27
6. Press the ON/OFF button to switch on the parent unit. If the camera is already switched
on, the transmission image from the camera will automatically appear on the screen. If the
camera is still switched off, an acoustic signal is emitted and the following symbol
appears on the monitor: .
7.3 Initial use of parent unit with mains part plug
1. C onn ect the small end of the “Monitor” parent mains part plug with the parent unit.
2. Connect the other end of the mains part plug to the socket.
3. The parent unit switches on automatically. Press the ON/OFF b utton to switch off the unit.
If the parent unit and camera are already switched on, the transmission image from
the camera will automatically appear on the screen of the parent unit.
8. Operating the parent unit
8.1 Infrared night vision
In order to ensure that clear transmission images can be seen on the screen even when it is
dark, the Video Baby Monitor automatically activates the infrared night vision in the dark. When
the infrared night vision is active, a moon symbol ( ) is shown on the screen.
8.2 Set the volume
The parent unit has 5 volume levels.
To adjust the volume, press the ( ) button or the ( ) button.
8.3 Set the brightness
The parent unit has 5 brightness levels.
To adjust the brightness, press the ( ) button or the ( ) button.
8.4 Intercom function
The parent unit has an intercom function.
To activate the intercom function, hold down the ( ) button on the parent unit and speak
into the unit. The words you have spoken can now be heard on the camera. To deactivate the
intercom function, release the ( ) button again.
8.5 Settings menu
You can adjust the following settings in the menu of the parent unit: zoom function, lulla-
bies, alarm, temperature unit, add/delete/view camera, alternating camera image and
power-saving mode.
• To access the settings menu, switch the parent unit on and press the ( ) button. The fol-
lowing settings menu appears at the bottom of the camera screen: