Dolby Laboratories VCZ625 - Manual (Page 22)

28
VCZ625
● When watching through a wide TV monitor
(16:9)
• WIDE:
3. Press the [ENT] button to enter.
The factory default setting is NORMAL/PS.
Setting up the TV type
Set the TV type to NTSC, PAL, MULTI.
1. Following the steps 1 to 4 in “Selecting the
monitor menu”, select “TV TYPE” from
“GENERAL SETUP”.
2. Press the “ ” or “ ” button to select MULTI,
NTSC, or PAL.
3. Press the [ENT] button.
The factory default setting is NTSC.
* This setting can be changed with the [NTSC/
PAL] button on the remote control unit. For a
detailed information, see pages on which the
sections entitled “4. REMOTE CONTROL”
and “5. COMPONENTS AND FUNCTIONS”
are found.
Changing Initial Settings such as Menu Language, etc.
Setting up the screen size
Set up the screen size according to the TV
monitor to which the unit is connected.
1. Following the steps 1 to 4 in “Selecting the
monitor menu”, select “TV DISPLAY” from
“GENERAL SETUP”.
2. Press the “ ” or “ ” button to select a screen
size.
➔ The color of the selected item changes.
● When watching through a conventional TV
monitor (4:3)
• NORMAL/PS : The leftmost and rightmost
areas of the screen are cut off.
This function allows displaying the
important par t of image fully on the
screen. In some cases, image is displayed
while being panned (scrolled).
• NORMAL/LB : A black zone is created in
the top and bottom areas of the screen.
This method displays Cinema Scope and
Vista Vision images without cutting them
off by creating a black zone on the top
and bottom gaps.