Dolby Laboratories VCZ625 - Manual (Page 18)

24
VCZ625
Pausing playback
Press the Play/pause [ ] button during
playback.
➔ Playback pauses.
■ To resume playback
• Press the Play/pause [ ] button again,
and playback resumes.
Skipping a track (searching)
Press the TRACK up [ ] / TRACK down [ ]
buttons.
➔ Tracks are skipped, as many as the times
the button is pressed, and playback starts.
• Press the [ ] button, and playback
starts from the beginning of the next track.
• Press the [ ] button, and playback
starts from the beginning of the current
track. When this button is pressed again
within about 2 seconds, playback starts
from the beginning of the previous track.
This operation skips the track over the folder.
Fast forward and fast rewind
Press and hold the Fast forward [ ] button or
Fast rewind [ ] button during playback.
➔ Press the button, and the playback speed
becomes 4-time faster first and then 8-time
faster 3 seconds later. Release the button,
and the normal speed is restored.
Selecting a track on the screen
Select a desired file with the Cursor button (“ ”
and “ ”) and press the [ENT] button.
➔ Play starts.
FOLDER list display
Listening to an MP3
Screen selection flow
ID3 Tag display screen
FILE list display screen
FOLDER list display screen
Press the
[RTN] button
Press the
[RTN] button
1 Select with the Cursor button (“ ” and “ ”)
and determine with the [ENT] button.
2 In case of a file on which ID3 Tag information
data have been recorded...
If any cursor button input was not made for a
specified period of time after file selection, ID3
Tag screen is displayed.
Playback by selecting a folder and
track (Direct select mode)
This operation allows searching using the folder
and track numbers recorded on the MP3 disc.
1. Press the [SEARCH MODE] button during
playback.
➔ Each time you press the button, you can
switch between “T000” for track number input
and “F000” for folder number input.
2. Input the number for the track or folder that
you want to play back with the ten-key buttons
(0 to 9).
3. Press the [ENT] button.
When you select the folder number playback starts
from Track 1 of the input folder number.
When you are searching for some other folder and
track while a file is being played, pressing the
[MENU] button will return to the file being played.
Searching a desired track
(Track scan playback)
● About track scan playback
This operation plays back all tracks recorded
on the disc, about 10 seconds for each.
Press the [SCAN] button.
➔ The monitor displays “TRACK SCN”.
• Scan playback starts from the next track.
■ To cancel track scan playback
Press the [SCAN] button again.
➔ The playback status indication “TRACK
SCN” goes off from the monitor and the track
currently being played back continues.