Dolby Laboratories VCZ625 - Manual (Page 21)

VCZ625
27
Changing Initial Settings such as Menu Language, etc.
Menu settings described in this section are
displayed on the monitor and can be selected by
operating the remote control unit.
If the set language has not been recorded on the
disc, the language specified on the disc is used
for display.
Selecting the monitor menu
1. Press the [SET UP] button to display the main
menu.
2. Select GENERAL SETUP or PREFERENCES
with the “ ” or “ ” button and press the
[ENT] to enter.
3. Press the “ ” or “ ” button to select the left
menu item.
4. Press the “ ” button to go to the option list.
5. Press the “ ” button to go to back to the left
menu item.
6. Press the [RTN] button to display the main
menu.
7. Press the [SET UP] button to return to the
original mode from the set-up mode engaged.
(Main menu)
(Sub menu)