Dolby Laboratories VCZ625 - Manual (Page 12)

18
VCZ625
Pausing playback
Press the Play/pause [ ] button during
playback.
➔ Playback pauses.
■ To resume playback
• Press the Play/pause [ ] button, and
playback resumes.
Slow playback
Press and hold the [SLOW] button.
➔ While the button is being pressed, slow
playback continues at the speed 1/2 times
the normal playback.
• Slow playback cannot be performed in the
backward direction. In addition, audio
cannot be reproduced during slow
playback.
Skipping a track (searching)
Press the TRACK up [ ] / TRACK down [ ]
button during playback.
➔ The track is skipped and playback starts.
• Press the [ ] button, and playback
starts from the beginning of the next track.
• Press the [ ] button, and playback
starts from the beginning of the current
track. When this button is pressed again
within about 2 seconds, playback starts
from the beginning of the previous track.
This operation cannot be performed on some
discs with PBC.
Watching a video CD
After disc selection, the play mode is automatically
engaged.
• Button operation may not be allowed
depending on the story of the disc.
■ After the menu screen is displayed
For V-CD discs equipped with the PBC (Play
Back Control) function, the menu screen
appears. After the menu screen is displayed,
select an item in the following operations and
play it back.
Selecting the V-CD menu (for V-CD
discs with PBC)
This key does not function on some discs.
1. Press the [MENU] button during playback.
➔ The V-CD menu appears.
The displayed contents may differ,
depending on the V-CD software.
• Example showing menu display
The menu screen can be switched
depending on a disc being played.
2. Otherwise, select an item with the ten-key
buttons on the remote control unit and press
the [ENT] button to enter.
➔ The video images of the selected item are
played back.
Stopping playback
Press the Stop [ ] button during playback.
➔ Playback stops.
When the PBC is turned on
• When the Play/pause [ ] button is
pressed, the disc plays from the beginning.
If the unit is CeNET connected and the
function is switched, the disc plays from the
beginning.
When the PBC is turned off
■ To resume playback
• Press the Play/pause [ ] button, and
playback resumes from the scene where
playback is stopped.
Current
location
Track
Backward
direction Playback
direction
Track Track