Besafe X3-GB - Manual (Page 7)

12 13
Place the seat sideways into the car with the front brace
towards you.
Turn the seat into the right position (with the front brace against
the back rest).
To enlarge the space for the legs of the child, you can move
the front brace outwards with the ratchet. Keep this space as
small as possible.
In the front seat of the vehicle, you should position the seat
against the dashboard.
Push the floor support down to the floor. The floor support
must go through the belt loop and the belt loop must be led
into the hook on the floor support (15).
Position the 3 point car belt. Place the hip belt over the
base of the seat behind the belt guiding horns on each side.
Fasten the car belt, click (16). Tension the shoulder belt.
Pull out the shoulder belt and make it into a loop (17a).
Thread the loop through the metal part of the red belt block (17b).
Guide the loop into the red slit (17c).
Tighten the belt by pulling the top part down (17d).
12
With the anchor belts in place the installation can continue:
7-
8-
9-
10-
11-
12-
13-
14-
15-
16-
(15)
(16)
(18)
(17)
a b c d
Rearward-facing in the front seat:
installation
! Rearward-facing in
the front seat (18).