Besafe X3-GB - Manual (Page 3)

4 5
! It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
Preparing to install Rearward-facing in the
back or front seat: preparation
Crucial parts
When mounting in the back seat of the vehicle, push the
front seat of the vehicle forward as much as possible. When
mounting in the front seat, adjust the back rest in an upright
position.
Install the front brace by sliding the two pins in the holes of
the belt guiding hook. Move the front brace inwards with the
ratchet, not further than the stop sign. The ratchet is used to
adjust the front brace in both directions. Slide the knobs (see
red circle) on the ratchet up or down to change direction (1).
Floor support
Release handle head rest
Belt clamp (2x)
Adjustable head rest
Harness shoulder straps
Harness buckle
Central adjuster
Reclining lever
Front brace
Belt guiding hook
Ratchet for front brace
Belt guiding horns (2x)
Connector for anchor belt (2x)
Locking bolt floor support
Belt loop floor support
Anchor belt (2x)
Assemble the floor support before you install the seat in your
vehicle.
5
1-
2-
3-
(1)