Belshaw Adamatic Harmony Deck Oven - Manual (Page 28)

SET UP PARAMETER FUNCTION LIST (“F” SETTINGS)
F1 - MONO CONSTANT (FACTORY SET AT 210C)
F2 - TOP HEAT GAIN (FACTORY SET AT 50)
F3 - BOTTOM HEAT GAIN (FACTORY SET AT 50)
F4 - FRONT TOP ELEMENT OFFSET VALUE (0-50)
(FACTORY SET AT 25)
F5 - DEG “C”, DEG”F”
F6 - “2 MINUTE FROM END OF BAKE ALARM” (ENABLE=1, DISABLE=0)
F7 - PRE-STEAM - (ENABLE=1, DISABLE=0)
F8 - STEAM - (ENABLE=1, DISABLE=0)
F9
- BAKE TEMPERATURE OFF-SET (+ - 25 DEG C)
F10 -
MAXIMUM SET TEMPERATURE LIMIT (250 DEG “C” DEFAULT)
MAXIMUM TEMPERATURE 290 DEG “C”
F11 - BAKE CONTROLS LOCKOUT – (ENABLE=1, DISABLE=0)
(TO PREVENT OPERATOR CHANGING SET BAKE PARAMETERS)
F12 -
“POWER SAVE” ENABLE/DISABLE (not in use at this time)
IF OVEN IS NOT USED FOR THIS SET TIME, THE TOP
HEATERS WILL SWITCH OFF AND OVEN WILL MAINTAIN
TEMPERATURE USING BOTTOM ELEMENTS ONLY. ONCE ANY
BUTTON IS PRESSED NORMAL OPERATION OF THE OVEN
RETURNS.
F13 -
INTERIOR LIGHT AUTO-TIMEOUT - ON/OFF.
BETWEEN 1 AND 20 MINUTES (0 = disabled)
F14 -
0-9 PROGRAM
F15 -
7 DAY TIMER - (ENABLE=1, DISABLE=0)
IF ENABLED, “SET BAKE” TIME ACTS AS EXTRA TIME BUTTON.
IF DISABLED, “AUTO ON SET” ACTS AS EXTRA TIME BUTTON.
F16 - 8 HOUR COUNT DOWN TIMER - (ENABLE=1, DISABLE=0)
AFTER 8 HOURS THE OVEN WILL TURN OFF (NOT DURING A BAKE
CYCLE).
BEFORE SWITCH OFF, DISPLAYS WILL FLASH AND ALARM WILL
SOUND. IF ANY BUTTON IS PRESSED AT THIS TIME, AN HOUR WILL
BE ADDED TO THE TIMER.
FG257 MODULAR DECK 02/07 RAC
27