Belshaw Adamatic HG18C Glazer - Manual (Page 16)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
iv MN-1753EN HG / HGEZ Standard & Under Counter TS
Preface
The HG/HGEZ is designed to glaze donuts on
the top and sides. It creates an even distribution
of glaze.
The HG/HGEZ is designed to be used on a level
floor.
The HG/HGEZ, produces 0.0 dB(A) of
equivalent A-weighted sound pressure at
workstations. This has been determined because
there is no machine operation. Operation of
HG/HGEZ is by a human operator.
Thorough understandings of how to operate,
clean, and maintain the HG/HGEZ safely will
prevent production delays and injuries. The
operator must work safely at all times, read and
follow the instructions in this manual, and heed
all warnings, including the following:
• Do not overfill the glaze kettle. If glaze
overflows the kettle, it could cause
someone to slip on the floor and be
seriously injured.
• To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
• Be careful never to get glaze, water, or
other materials on the floor. If anything
does get spilled on the floor, clean the
area immediately. Materials on the floor
can cause people to slip or fall, resulting
in serious injury or loss of life.
• To prevent damage to the kettle, never
use a metal object to scrape the kettle
use only a plastic or rubber bowl scraper.