Belshaw Adamatic HG18C Glazer - Manual (Page 13)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. The freight company has
accepted responsibility for the safe delivery of
our machines. For your protection, inspect the
machine to see that no parts are bent, scratched,
or otherwise damaged. If any damage has
occurred in shipping, file a freight claim with the
shipping company immediately. To transport the HG/HGEZ Glazer to the
workstation and unpack it:
1. Use a forklift to transport the shipping crate
to the workstation.
2. Break down the shipping crate.
3. Remove all the packing materials from the
fryer, including foam, tape, brown paper,
plastic, and white protective coating.
IMPORTANT
Keep this manual for future reference.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by ______________________________________________________________________
Installed by _______________________________________________________________________
Date of installation __________________________ Model number _________________________
Serial number ______________________________________________________________________
03/19/08
MN-1753EN
Belshaw Bros., Inc.
814 44th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: (206) 322-5474 • Fax: (206) 322-5425
Email: [email protected] • http://www.belshaw.com