Belshaw Adamatic FT42 Feed Table - Manual (Page 3)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. Belshaw cannot pay for
shipping damage, because the freight company
has accepted the machine from Belshaw in good
condition, and is responsible for its safe delivery.
For your protection, inspect the machine to see
that no parts are bent, scratched, or otherwise
damaged. If any damage has occurred in
shipping, file a freight claim with the shipping
company immediately. To unpack the FT42-E Feed Table and transport
it to the workstation:
1. Remove the Feed Table from the shipping
crate.
2. Coil the power cord so you do not trip over
it.
3. With the help of another person, carry the
Feed Table to the workstation.
IMPORANT
Keep this manual for future reference.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by _____________________________________________________________________
Installed by ______________________________________________________________________
Date of Installation ________________________________________________________________
Model number ___________________________________________________________________
Serial number
02/20/08
MN-1667EN
Belshaw Bros., Inc.
814 44th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: +-1-206-322-5474 • Fax: +-1-206-322-5425
E-mail: [email protected] • http://www.belshaw.com