BECKHOFF C1120 User Manual
Page 14
C1120 S5 to II/O-Lightbus Interface
Beckhoff II/O-Lightbus System
Page 14 of 52
Version 2.1
Date 27.06.97
Function keys
F1
HELP
displays help text.
F2
INSERT MODULE
by pressing "F2" a new module is inserted at the current cursor position. The
address is set to the equivalent line number. Following module addresses are
incremented. After inserting a new module, description, I/O addresses and ident
no. can be edited. Every line of the I/O list, containing a module number and I/O
addresses, generates one telegram for II/O-Lightbus per PLC cycle.
F3
CLEAR MODULE
by pressing "F3" a line of the II/O setup is deleted. A confirmation is necessary
for that action to take place.
Warning !
In case of deleting a module from the I/O list, it is definitively
necessary to remove the equivalent module from the II/O-
Lightbus ring. Otherwise the II/O-Lightbus ring is incorrectly
configured and is not ready to work.
F4
INSERT ROW
If it is necessary to serve a module with more than one telegram per cycle,
additional telegrams are generated by inserting a line to an existing module entry.
In this case, the inserted line holds the same module number as the line before.
F10 PREVIOUS MENU
returns to the master setup menu.