BECKHOFF Onboard SATA RAID - Manual (Page 19)

Rebuilding the RAID system
Starting the RAID rebuild in the extended view of the
Storage Console
All RAID volumes and all hard disk connections are shown in the extended
view.
In the following view it can be seen that a hard disk is missing that
previously belonged to a RAID volume and also that a “Non-RAID Hard
Drive” is connected to “Port 1”. Clicking with the right mouse button on this
hard disk enables the option Rebuild to this Hard Drive to be selected:
Extended view of the
Storage Console
The wizard for rebuilding a RAID volume then appears:
Rebuild wizard
Clicking on Next opens the selection dialogue for the new RAID hard disk.
The hard disk on which you previously right-clicked is already preselected.
Beckhoff onboard SATA-RAID 17