BECKHOFF Onboard SATA RAID - Manual (Page 10)

Status information
Status information under Windows
Display during normal operation
Normal operation Under Windows the RAID system works in the background, i.e. under the
operating system the user sees a logical drive that is indistinguishable from
a single hard disk. There is no indication that the system is working
properly.
Display after the failure of a hard disk
Failure of a hard disk Following the failure of a hard disk, a message appears in the task bar at
the bottom right at each restart or new logon.
Example: Port 0 and Port 1 are each connected to a hard disk; the two
disks together form a RAID 1 volume. If the data cable is
unplugged from the hard disk on Port 1, the following message
appears:
Storage Console Clicking on the message opens the standard view of the Storage Console.
Warning
The opening and usage of the Storage Console can under certain
circumstances lead to impairment of real-time capability!
In this example the hard disk on Port 0 (connection 0) is okay (shown in
green).
Storage Console: Example
The extended view of the Storage Console, which contains further
information, can be opened via the View menu:
8 Beckhoff onboard SATA-RAID