BECKHOFF CB3060 - Manual (Page 87)

Chipset Chapter: BIOS Settings
Beckhoff New Automation Technology CB3060 page 87
5.4.2.2 NB PCIe Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ NB PCIe Configuration ▲│Configure PEG0 B0:D1:F0 │
│ PEG0 Not present █│Gen1-Gen3 │
│ PEG0 - Gen X [Auto] █│ │
│ PEG1 Not Present █│ │
│ PEG1 - Gen X [Auto] █│ │
│ PEG2 Not Present █│ │
│ PEG2 - Gen X [Auto] █│ │
│ █│ │
│ Run-time C7 Allowed [Enabled] █│ │
│ Enable PEG [Auto] █│ │
│ Detect Non-Compliance Device [Disabled] █│ │
│ Program PCIe ASPM after OpROM [Disabled] █│ │
│ PEG0 De-emphasis Control [-3.5 dB] █│────────────────────────────────│
│ PEG1 De-emphasis Control [-3.5 dB] █│→←: Select Screen │
│ PEG2 De-emphasis Control [-3.5 dB] █│↑↓: Select Item │
│ PEG0 - ASPM [ASPM L0s] █│Enter: Select │
│ ASPM L0s [Both Root and Endpo...] █│+/-: Change Opt. │
│ PEG1 - ASPM [ASPM L0sL1] ░│F1: General Help │
│ ASPM L0s [Both Root and Endpo...] ░│F2: Previous Values │
│ PEG2 - ASPM [ASPM L0sL1] ░│F3: Optimized Defaults │
│ ASPM L0s [Both Root and Endpo...] ░│F4: Save & Exit │
│ PEG Sampler Calibrate [Disabled] ░│ESC: Exit │
│ Swing Control [Full] ░│ │
│ PEG Gen3 Equalization [Disabled] ░│ │
│ Gen3 Eq Preset Search [Enabled] ░│ │
│ ▼│ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
 PEGn - Gen X
Options: Auto / Gen1 / Gen2 / Gen3
 Run-time C7 Allowed
Options: Disabled / Enabled
 Enable PEG
Options: Disabled / Enabled / Auto
 Detect Non-Compliance Device
Options: Disabled / Enabled
 Program PCIe ASPM after OpROM
Options: Enabled / Disabled
 De-emphasis Control
Options: -6 dB / -3.5 dB
 PEGn ASPM
Options: Disabled / Auto / ASPM L0s / ASPM L1 / ASPM L0sL1
 ASPM L0s
Options: Root Port Only / Endpoint Port Only / Both Root and Endpoint Ports
 PEG Sampler Calibrate
Options: Auto / Disabled / Enabled
 Swing Control
Options: Reduced / Half / Full
 Gen3 Equalization
Options: Disabled / Enabled