BECKHOFF CB3060 - Manual (Page 22)

Chapter: Connectors VGA/DVI
page 22 Beckhoff New Automation Technology CB3060
3.5 VGA/DVI
The module is equipped with a standard DVI-I-connector, which can be used to connect a DVI capable
device, a standard VGA monitor or an HDMI capable device. External cable adapters that convert from
DVI to VGA or HDMI are required to connect standard VGA or HDMI devices.
Pinout DVI-I:
Pin Name Description
1 TMDSDAT2# DVI data 2 -
2 TMDSDAT2 DVI data 2 +
3 GND ground
4 N/C reserved
5 N/C reserved
6 DDC CLK DDC clock (DVI/VGA)
7 DDC DAT DDC data (DVI/VGA)
8 VSYNC VGA vertical sync
9 TMDSDAT1# DVI data 1 -
10 TMDSDAT1 DVI data 1 +
11 GND ground
12 N/C reserved
13 N/C reserved
14 VCC 5 volt supply
15 GND ground
16 HP_DETECT hot plug detect
17 TMDSDAT0# DVI data 0 -
18 TMDSDAT0 DVI data 0 +
19 GND ground
20 N/C reserved
21 N/C reserved
22 GND ground
23 TMDS CLK DVI clock
24 TMDS CLK# DVI clock
C1 RED VGA red
C2 GREEN VGA green
C3 BLUE VGA blue
C4 HSYNC VGA horizontal sync