BECKHOFF CB2051 - Manual (Page 37)

Audio Chapter: Connectors
Beckhoff New Automation Technology CB2051 page 37
3.18 Audio
Audio input and output functions can be accessed via a 2x5 pin connector (JST B10B-PHDSSLFSN,
mating connector: PHDR-10VS). There are two ways to use this connector. Default functionality is the
familiar audio in, audio out, and microphone. OS dependent device drivers can switch these signals to
support an 5.1 output; thus in this mode no audio input signals are available.
Signals "SPDIFI" and "SPDIFO" provide digital input and output. If a transformation to a coaxial or optical
connector is necessary this must be performed externally.
Description Name Pin Name Description
digital output SPDIF SPDIFO 1 6 3.3V 3.3 volt supply
digital input SPDIF SPDIFI 2 7 S_AGND analog ground sound
sound output right /
front output right LOUT_R /
FRONT_R 3 8 LOUT_L /
FRONT_L sound output left /
front output left
AUX input right /
rear output right AUXA_R /
REAR_R 4 9 AUXA_L /
REAR_L AUX input left /
rear output left
microphone input 1 /
center output MIC1 /
CENTER 5 10 MIC2 /
LFE microphone input 2 /
LFE output