BECKHOFF CB2051 - Manual (Page 32)

Chapter: Connectors LVDS
page 32 Beckhoff New Automation Technology CB2051
3.14 LVDS
The board also offers the possibility to use displays with LVDS interface. These can be connected via a
30 pin flat-cable plug (JAE FI-X30S-HF-NPB, mating connector: FI-X30C(2)-NPB). Only shielded and
twisted cables may be used. The display type is to be chosen over the BIOS setup. The connector has
two additional shield pins S1 and S2 which are omitted in the pinout table below.
Pinout LVDS connector:
Pin Name Description
1 TXO00# LVDS even data 0 -
2 TXO00 LVDS even data 0 +
3 TXO01# LVDS even data 1 -
4 TXO01 LVDS even data 1 +
5 TXO02# LVDS even data 2 -
6 TXO02 LVDS even data 2 +
7 GND ground
8 TXO0C# LVDS even clock -
9 TXO0C LVDS even clock +
10 TXO03# LVDS even data 3 -
11 TXO03 LVDS even data 3 +
12 TXO10# LVDS odd data 0 -
13 TXO10 LVDS odd data 0 +
14 GND ground
15 TXO11# LVDS odd data 1 -
16 TXO11 LVDS odd data 1 +
17 GND ground
18 TXO12# LVDS odd data 2 -
19 TXO12 LVDS odd data 2 +
20 TXO1C# LVDS odd clock -
21 TXO1C LVDS odd clock +
22 TXO13# LVDS odd data 3 -
23 TXO13 LVDS odd data 3 +
24 GND ground
25 3.3V 3.3 volt supply
26 DDC_CLK EDID clock for LCD
27 DDC_DAT EDID data for LCD