Usb configuration – BECKHOFF CB1061 User Manual
Page 92
Chapter: BIOS Settings
Chipset
page 92
Beckhoff New Automation Technology CB1061
4.4.1.2
USB Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ USB Configuration │Precondition work on USB host │
│ │controller and root ports for │
│ USB Precondition [Disabled] │faster enumeration. │
│ XHCI Mode [Manual] │ │
│ BTCG [Enabled] │ │
│ │ │
│ XHCI Pre-Boot Driver [Enabled] │ │
│ │ │
│ Route USB 2.0 pins to which HC? [Route Per-Pin] │ │
│ USB 2.0 PIN #0 [Route to EHCI] │ │
│ USB 2.0 PIN #1 [Route to EHCI] │ │
│ USB 2.0 PIN #2 [Route to EHCI] │ │
│ USB 2.0 PIN #3 [Route to EHCI] │────────────────────────────────│
│ USB 2.0 PIN #4 [Route to EHCI] │→←: Select Screen │
│ USB 2.0 PIN #5 [Route to EHCI] │↑↓: Select Item │
│ USB 2.0 PIN #6 [Route to EHCI] │Enter: Select │
│ USB 2.0 PIN #7 [Route to EHCI] │+/-: Change Opt. │
│ USB 2.0 PIN #8 [Route to EHCI] │F1: General Help │
│ USB 2.0 PIN #9 [Route to EHCI] │F2: Previous Values │
│ USB 2.0 PIN #10 [Route to EHCI] │F3: Optimized Defaults │
│ USB 2.0 PIN #11 [Route to EHCI] │F4: Save & Exit │
│ USB 2.0 PIN #12 [Route to EHCI] │ESC: Exit │
│ USB 2.0 PIN #13 [Route to EHCI] │ │
│ │ │
│ Enable USB 3.0 pins [Select Per-Pin] │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Precondition
Options:
Disabled / Enabled
XHCI Mode
Options:
Smart Auto / Auto / Enabled / Disabled / Manual
BTCG
Options:
Disabled / Enabled
XHCI Pre-Boot Driver
Options:
Disabled / Enabled
Route USB 2.0 pins to which HC?
Options:
Route Per-Pin / Route all Pins to EHCI / Route all Pins to XHCI
USB 2.0 PIN #X
Options:
Route to EHCI / Route to XHCI
Enable USB 3.0 pins
Options:
Select Per-Pin / Disable all Pins / Enable all Pins
USB 3.0 PIN #X
Options:
Disabled / Enabled
USB Ports Per-Port Disable Control
Options:
Disabled / Enabled
USB Port #X
Options:
Disabled / Enabled
USB3.0 Port #X
Options:
Disabled / Enabled