2 back panel connectors, 1 dvi connectors – BECKHOFF CB1061 User Manual
Page 23
Back Panel Connectors
Chapter: Connectors
Beckhoff New Automation Technology CB1061
page 23
3.2 Back Panel Connectors
The board complies with the ATX form factor and thus honours the "I/O Connector Area" as defined in the
ATX specification. A range of standard connectors are available: You can connect PS/2 keyboard and
mouse, displays, speakers, microphone, LAN, USB etc. If the board is mounted in a normal ATX
compliant case, these connectors are located on the back side of the case.
3.2.1 DVI Connectors
The CB1061 has one DVI-I connector and one DVI-D connector combined in one component (Foxconn
QH11121-DADF-4F). With an appropriate adapter, you can connect a CRT display to the DVI-I
connector. Digital DVI or HDMI displays can be attached to both connectors. The CPU's graphics system
supports up to two independent displays.
Pinout DVI-I:
Pin
Name
Description
1
TMDSDAT2#
DVI data 2 -
2
TMDSDAT2
DVI data 2 +
3
GND
ground
4
N/C
reserved
5
N/C
reserved
6
DDC CLK
DDC clock (DVI/VGA)
7
DDC DAT
DDC data (DVI/VGA)
8
VSYNC
VGA vertical sync
9
TMDSDAT1#
DVI data 1 -
10
TMDSDAT1
DVI data 1 +
11
GND
ground
12
N/C
reserved
13
N/C
reserved
14
VCC
5 volt supply
15
GND
ground
16
HP_DETECT
hot plug detect
17
TMDSDAT0#
DVI data 0 -
18
TMDSDAT0
DVI data 0 +
19
GND
ground
20
N/C
reserved