Daewoo DTS - 42 - Manual (Page 59)

59
NOTES:
1) If an external device is not connected or INPUT signal is not
applied, Warning Message (“No Signal”) would be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly done.
3) Also, you can select input using [INPUT SELECT] button in
the keypad of the pdp set.
The used sequence is as follows:
TV -> PC -> DVI -> Component1 -> Component2 -> Video1
-> Video2
Component 1
1920 x 1080
Component1
PC DVI
Component2
Video1 Video2
TV
• “MULTIMEDIA” button
• “TV/VIDEO” button