BECKHOFF EP1908 User Manual
Page 29
Operation
EP1908-0002
27
4.5 EL1908 configuration in the TwinCAT System Manager
CAUTION
Do not change the register values!
Do not change any of the CoE objects in the TwinSAFE EtherCAT Boxes. Any
modifications (e.g. via the System Manager) of the CoE objects would permanently set
the EtherCAT Boxes to the Fail-Stop state!
4.5.1 Adding an EtherCAT device
See TwinCAT automation software documentation.
4.5.2 Adding a EP1908
An EP1908-0002 is added in exactly the same way as any other Beckhoff EtherCAT Box. In the list open
the item Safety Terminals and select the EP1908-0002.
See also other documents in the category BECKHOFF Equipment:
- Bus Terminal System (19 pages)
- EP-xxxx-xxxx (19 pages)
- BK2000 (30 pages)
- LC3100 (67 pages)
- BK4000 (28 pages)
- BK3xx0 (95 pages)
- BK5000 (12 pages)
- LC5200 (32 pages)
- BK7000 (29 pages)
- BK7500 (32 pages)
- BK7300 (40 pages)
- BK8100 (26 pages)
- BC2000 (28 pages)
- BC3100 (51 pages)
- BC7300 (48 pages)
- BC8100 (36 pages)
- BC3150 (112 pages)
- KL1012 (2 pages)
- KL1114 (2 pages)
- KL1164 (1 page)
- KL1232-xxxx (4 pages)
- KL1501 (19 pages)
- KL1512 (15 pages)
- KL2521-0024 (18 pages)
- KL2512 (21 pages)
- KL2612 (4 pages)
- KL2622 (9 pages)
- KL3062 (24 pages)
- KL3064 (20 pages)
- KL4132 (19 pages)
- KL4034 (25 pages)
- KL3302 (23 pages)
- KL3351 (18 pages)
- KS3681 (43 pages)
- KL4112 (18 pages)
- KL5001 (16 pages)
- KL5051 (17 pages)
- KL5101-0012 (21 pages)
- KS5111-0000 (21 pages)
- KL5121 (19 pages)
- KL6021 (20 pages)
- KL6051 (17 pages)
- Z1000 (2 pages)
- KL6071 (12 pages)
- Z1003 (2 pages)