BECKHOFF EP1908 User Manual

Page 28

Operation

EP1908-0002

Index

Name

Meaning

Flags

Default
value

800E:0C

Error in the safety
mat operating
mode: input pair
disagree

Bits Error in the input pair

1, 0 11

bin

Error in the first input pair

bin

3, 2 11

bin

Error in the second input pair

bin

5, 4 11

bin

Error in the third input pair

bin

7, 6 11

bin

Error in the fourth input pair

bin

800E:0D

Error in the safety
mat operating
mode: external
supply

Bit

Error in the test pulses in the safety mat
operating mode; i.e. the EtherCAT Box has
detected an external supply.

bin

Error at input 1

bin

Error at input 2

bin

Error at input 3

bin

Error at input 4

bin

Error at input 5

bin

Error at input 6

bin

Error at input 7

bin

Error at input 8

bin

800E:13

Speed monitoring
error: Overspeed

Bit

Overspeed was detected at an input.

bin

Speed at input 1 is too high

bin

Speed at input 2 is too high

bin

Speed at input 3 is too high

bin

Speed at input 4 is too high

bin

Speed at input 5 is too high

bin

Speed at input 6 is too high

bin

Speed at input 7 is too high

bin

Speed at input 8 is too high

bin

800E:14

Error in operating
mode: Two
Channel Sync
Velocity Control

Bit

Both inputs of an input pair were read with
inactive state.

bin

Error in the first input pair

bin

Error in the second input pair

bin

Error in the third input pair

bin

Error in the fourth input pair

bin

800E:15

Error in operating
mode: Two
Channel Sync
Velocity Control
and Two Channel
Encoder Velocity
Control

Bit

Different speeds were identified for the two
inputs of an input pair.

bin

Error in the first input pair

bin

Error in the second input pair

bin

Error in the third input pair

bin

Error in the fourth input pair

bin

Note

Differing diagnostic messages possible

Due to the variable order or execution of the test series, diagnostic messages differing
from those given in the table above are possible.