BECKHOFF C5002 - Manual (Page 9)

INDUSTRIE ELEKTRONIK Eiserstraße 5 / D-33415 Verl / Phone 05246/963-0 / Fax 05246/963-149
8 Operating Instructions Slide-in PC C5002
C5002
Servicing and maintenance
Changing the Air Filter
Usable life
Caution
Item number
The PC has an air filter that must be changed at regular intervals. The
filter's usable life depends on the number of operating hours and on the
amount of dust in the surrounding air.
If it is not possible to determine the need to change the filter with a visual
check, then if the air is very dusty the filter must be changed once a month.
If a necessary filter change is omitted components within the computer can
be damaged or destroyed through overheating.
The ordering/item number for replacement filters is: C9900-Z210
View of the fan cover
Filter changing procedure
Caution!
Follow these instructions when changing the air filter:
1. First use a screwdriver to turn one of the fast closing screws (see
photo above) 90 degrees in any direction.
2. Hold the fan cover in place while you do the same with the second
screw. Failure to follow this procedure can result in injury to persons or
damage to objects situated underneath the PC or to the cover itself as
it falls.
3. The fan cover is not fixed to the housing in any other way, and can be
drawn forwards to remove it.
4. The dust filter can easily be pulled out and exchanged.
5. Return the filter cover to its original position on the housing.
6. Press
and turn both the fast-closing screws 90 degrees in any direction
with a screwdriver.
Cleaning
First switch the Industrial
PC off
The front of the Industrial PC can be cleaned with a soft, damp cloth. Do
not use any aggressive cleaning materials, thinners, scouring material or
hard objects that could cause scratches. The Industrial PC must be
switched off for cleaning.
Fan cover
Fast closing
screws