BECKHOFF CX50x0 - Manual (Page 45)

Notes on the documentation
CX50x0 - Hardware Documentation 43
Standard CMOS Features
This menu is used for setting date, time, hard disks, graphic mode and start-up behaviour. At the same time,
information about the memory configuration determined by the system is provided. The memory configuration
information cannot be changed. The setting options for date, time, graphics mode and startup behaviour are
described below. A new menu opens for setting the hard disk data.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Jun 30 2010 Item Help
Time (hh:mm:ss) 11 : 11 : 00
υ8; IDE Channel 0 Master [ None]
υ8; IDE Channel 0 Slave [ None]
Halt On [All, But Keyboard]
Base Memory 639K
Extended Memory 514,048K
Total Memory 515,072K
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Date (mm:dd:yy)
Options:
 mm … month
 dd … day
 yy … year
Time (hh:mm:ss)
 hh … hours
 mm … minutes
 ss … seconds
Halt On
This parameter can be used for stopping the boot process in the event of errors. Errors may be ignored. This menu
item is used to configure the settings.
 All Errors (stop for all types of error)
 No Errors (ignore all errors and continue system start-up)
 All , But Keyboard (missing keyboard is ignored)
Base Memory
This option is used for displaying the conventional memory (0 KB to 640 KB) in order to indicate whether it was
detected by the POST.
Extended Memory
Available memory from the first MB to the maximum memory capacity.
Total Memory
This is the total of base memory, extended memory and other memory.