BECKHOFF CX50x0 - Manual (Page 44)

Notes on the documentation
42 CX50x0 - Hardware Documentation
Note on using the setup
Attention
Changes in the BIOS settings may only be implemented by appropriately trained
staff.
The CX50x0 systems are delivered by Beckhoff Automation GmbH in a preconfigured state
and are therefore operational!
The BIOS settings should only be executed by appropriately trained staff.
Under Windows CE the BIOS should not be changed at all, since the operating system is
adapted to the hardware configuration. Any change in the addresses or interrupts would
lead to unstable system behavior or even crashing.
Within the individual setup pages, F6 can be used for loading fail-safe defaults, and F7 for optimised default values
for the individual setup entries. These default values are applied irrespective of whether the board was previously
booted successfully with a particular setup setting. The situation is different if the defaults are called from the TOP
menu. Once a setup setting that subsequently led to successful booting was saved, both menu items will load these
values as default for the setup pages. See also "Load Fail-Safe Defaults" and "Load Optimized Defaults".
Top menu
Phoenix - AwardBIOS CMOS Setup Utility
► Standard CMOS Features ► Frequency/Voltage Control
► Advanced BIOS Features Load Fail-Save Defaults
► Advanced Chipset Features Load Optimized Defaults
► Integrated Peripherals Set Password
► Power Management Setup Save & Exit Setup
► PnP/PCI Configuration Exit Without Saving
► PC Health Status
ESC: Quit ↑ ↓ →
← Select Item
F10: Save & Exit Setup
"Brief description of the function selected above"
A „►“ sign in front of the menu item indicates that a submenu is available. An "x" before a menu item indicates that
there is a setting option that has to be activated via a setting at a higher level.
Load Fail-Save Defaults
This option is used for absolute security settings. It is not suitable for continuous operation, but can be useful if the
PC malfunctions.
Load Optimized Defaults
This option is used for setting optimum values as recommended by the manufacturer.
Set Password
Here you can enter a setup password for preventing unauthorised invoking of the BIOS.
Save & Exit Setup
This option is used to save the settings and exit setup. Input: Y (Please note: enter Z with German keyboard).
Exit Without Saving
Quit setup without saving the settings. Setting: Y (Please note: enter Z with German keyboard).