BECKHOFF CX1000 - Manual (Page 47)

Decommissioning
Embedded PC 45
FIG. 4: Undoing the latching mechanism FIG 5: Separating the modules
The CPU can be separated from the power supply unit and the fieldbus connections in this way.
Note:
If the configuration has a power supply unit with an I/O interface, it is first necessary to release one terminal from the
top-hat rail so that the configuration can be separated from the I/O hardware.
Note:
The embedded PC must be shut down and the power supply disconnected before dismantling!
Warning
Forcibly opening the module housing (e.g. removing the cover) will destroy the housing.
Disposal
The device must be fully dismantled in order to dispose of it.
Electronic parts must be disposed of in accordance with national electronics scrap regulations.