BECKHOFF CX1000 - Manual (Page 11)

Product Overview
Embedded PC 9
Base Modules
Technical Data
The CX1000 CPU module is the basic module of the CX system. It comprises the CPU and the internal flash memory
in two implementation levels and offers the option to operate an additional memory medium in Compact Flash type II
format. Ethernet and an RS 232 interface are also part of the basic configuration. All other CX family components can
be connected via the PC104 interface that is available on both sides. The CPU module requires a CX1100 type
power supply module.
Technical data CX1000-0000
Processor compatible with Pentium MMX, clock frequency 266 MHz
Flash memory 64 MByte Compact Flash card
Internal main memory 32 MByte RAM (expandable to 128 MByte)
Interfaces 1 x RJ45 (Ethernet) and 1 x 9-pinD-Sub (RS 232)
Diagnostics LED 1 x Power, 1 x Link, 1x 100 MBit , 1 x LAN Aktivität,
1 x Flash access
Expansion slot 1 x Compact Flash type II insert with ejector
Clock battery-powered internal clock for time and date
Operating system Microsoft Windows CE.NET or Microsoft
Windows XP Embedded
Control software TwinCAT PLC Runtime or TwinCAT NC PTP Runtime
System bus 16 Bit ISA (PC104 standard)
Power supply via system bus (through CX1100 power supply module)
Dimensions 57 mm x 100 mm x 91 mm
Weight approx. 355 g ( with DVI/USB 435 g)
The passive cooling module CX1000-COOL is included in the scope of supply.
Note
The Watchdog function is only supported by Beckhoff in combination of TwinCAT with WINDOWS
NT based systems. For other operating systems without TwinCAT it is not possible to give a general
solution. The user must find a solution to the implementation of watchdog access on his own. As the
only support Beckhoff can provide
 the processor hardware description
 the CX-architecture description (CX1100-000x power supply manual)
The documents can be found in the Download area of our webserver (www.beckhoff.com)..