BECKHOFF CX1000 - Manual (Page 19)

Product Overview
Embedded PC 17
System interfaces
Technical Data
Unlike other CX components, the system interfaces cannot be upgraded or expanded in the field. They are supplied
ex factory in the specified configuration and cannot be separated from the CPU module. The system interfaces run
through the internal PC104, so that further CX components can be connected. The power supply of the system
interface modules is ensured via the internal PC104 bus.
Technical
data
CX1000-N001 CX1000-N002 CX1000-N003 CX1000-N005*
Interfaces 1 x DVI +
2 x USB 1.1 1 x COM2 +
1 x COM3 Line IN,
Line Mic IN,
Line OUT 1 x COM2 +
1 x COM3
Connection
type DVI-I 29-pin socket
+ 2 USB ports type
A 2 x 9-pin D-Sub 3.5 mm socket
for jack plug 2 x 9-pin D-Sub
Properties DVI-I interface also
carries out VGA
signals (DVI-A) max. Baud rate 115 kBaud on
both interfaces COM1: RXD,
TXD, DTR COM2: RXD, TXD built-in PC
Beeper
Line OUT
output, max.
200 mW,
suitable for
earphones max. Baud rate 115
kBaud on both
interfaces
2 x RS485/422,
optically isolated
Power
supply via system bus (through CX1100 power supply module)
Dimensions 19 mm x 100 mm x 91 mm
Weight
approx. 80 g
* can only be used instead of and not at the same time as CX1000-N002