Baumatic BHI909TS.GWK - Manual (Page 14)

Switching on a zone and setting a power level
IMPORTANT: A zone must be selected within 20 seconds of turning
the hob on. After this time the hob will return to stand-by mode.
o
Make sure that the bottom of the pan and the
surface of the hob are clean and dry before
placing a suitable pan on the cooking zone that
you wish to use.
o
Press the cooking zone selection button (2) of the
cooking zone that you want to use.
o
Select the power level for the cooking zone that you have
selected using the plus button of the zone you are using
and the minus button. If you do not choose a heat setting
within 20 seconds of turning the hob on, the hob will
switch off automatically.
o
You can alter the power level at any time during cooking using
the plus and minus buttons.
o
If the display flashes with the symbol shown
opposite, alternatively with the heat setting, this
means that:
 You have not placed a pan on the correct cooking zone or,
 The pan you are using is not suitable for induction cooking or,
 The pan is too small or not properly centred on the cooking
zone.
o
No heating will take place unless there is a suitable pan on the
cooking zone. The display will automatically turn off after 20
seconds if no suitable pan is placed on it.
14