Baumatic BCS461SS - Manual (Page 19)

o
When you have chosen a cooking function, the
temperature display will show a suggested
temperature. You can change the temperature
using the increase and decrease buttons (except when using
the 100°C steam cooking function).
o
The temperature is variable between the 50°C and MAX settings
or between 105°C and 130°C for the 130°C steam cooking
function.
o
When the display is showing your desired cooking temperature
release all buttons and after a few seconds the new temperature
will be set.
o
During the heating process, the centigrade symbol (°C) will flash
to indicate that it is heating up to the selected temperature.
When the temperature is reached the oven will beep and the
centigrade symbol will remain steady.
o
When you have finished cooking you can turn the appliance off
by pressing the power button.
Residual heat
o
After you have finished cooking and have turned the oven off,
the display will show the cavity temperature until it drops below
50°C.
o
This is a safety feature to prevent accidental burns from the hot
parts of the oven after cooking.
Cooking guidelines
o
Please refer to the information given on food packaging for
guidance on cooking temperatures and times. Once familiar with
the performance of your appliance, temperatures and times can
be varied to suit personal preference.
o
If you are using the fan oven function, then you should follow
the information given on the food packaging for this particular
mode of cooking.
o
You should pre-heat the oven and not place food inside of it until
the centigrade symbol stops flashing. You can choose not to pre-
heat when using the fan oven mode; however you should extend
the cooking time given on the food packaging by at least ten
minutes.
19